Access Button
Push-to-exit button designed for UniFi Access Hubs.
Shadow Mode (VRRP) High Availability
✓
LACP Port Aggregation
✓
Dynamic Routing
OSPF
✓
BGP
✓
Advanced QoS
✓
Multicast DNS (mDNS)
✓
Advanced NAT (SNAT / DNAT / Masquerade / NAT Pooling / 1-to-1 NAT)
✓
Integrated RADIUS Server
✓
RADIUS over TLS (RadSec)
✓
Additional Internet Failover with UniFi LTE Backup
✓
Internet Quality and Outage Reporting
✓
MAC Address Table Size
4,000
Policy-based WAN and VPN Routing
✓
Customizable DHCP Server
✓
IPv6 ISP Support
✓
IGMP Proxy
✓
Virtual Network Override
✓
All Traffic Flows
✓
Hardware
NVR Storage
(1) 3.5" NVR HDD bay
Built-in 128 GB SSD for Faster Experience
PoE Budget
180W
Max. PoE Wattage per Port by PSE
PoE
15.4W
PoE+
30W
Voltage Range PoE Mode
PoE: 44-57V
PoE+: 50-57V
Max. Power Consumption
50W (Excluding PoE Output)
Power Method
(1) Universal AC input, 100–240V AC, 4.4A Max., 50/60 Hz
(1) USP-RPS DC input, 52V DC, 3.94A
Power Supply
AC/DC, internal, 240W
Supported Voltage Range
100–240V AC
Heat Dissipation
170 BTU/hr (Excluding PoE Output)
Processor
Quad-core ARM® Cortex®-A57 at 1.7 GHz
System Memory
4 GB
On-board Storage
16 GB eMMC
128 GB SSD (Integrated)
Weight
5 kg (10.9 lb)
Enclosure Material
Aluminium CNC, SGCC steel
Mount Material
SGCC steel
LCM Display
1.3" touchscreen
Management
Ethernet
Bluetooth
LEDs
Ethernet
✓
SFP+
✓
RPS
✓
PSU
✓
HDD
✓
Button
(1) Factory reset
ESD/EMP Protection
Air: ± 15kV, contact: ± 8kV
Ambient Operating Temperature
-10 to 40° C (14 to 104° F)
Ambient Operating Humidity
5 to 95% noncondensing
NDAA Compliant
✓
Certifications
CE, FCC, IC, Anatel: 07309-22-08356, SRRC
Weight
Device: 965 g (2.1 lb)
Bracket: 445 g (1 lb)
Enclosure Material
Aluminum alloy, UV-stabilized polycarbonate, glass
Mount Material
Powder-coated stainless steel
Mounting
Wall mount, adapter to the gooseneck pedestal (Included)
Surface angle, flush mount, sunshield kit (Optional)
Indoor and Outdoor Use
Yes
Networking Interface
(1) GbE RJ45 port
Connectivity
BLE 4.2
NFC
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption
13W
Supported Voltage Range
48V DC
Video
Max. Frame Rate
30 FPS
Resolution
2MP 1200 x 1600 (3:4)
Optics
Resolution
8 MP (2448 × 3264)
Field of View
H: 79.4°, V: 97.5°, D: 118.2°
Sensors
Proximity sensor
ALS sensor
Display
Size
177 mm (7") diagonal
Screen Technology
Capacitive multi-touch
Luminance
Max. 1000 nits (Typical)
Screen Orientation
Portrait
Resolution
1024 x 600 px
Microphone
✓
Speaker
✓
NFC Frequency
13.56 MHz
NFC Read Range
< 30 mm (1.18'')
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
LEDs
Amber Learn More
Buttons
(1) Factory reset
PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-G3-Intercom, V01
Ambient Operating Temperature
Device: -30 to 60° C (-22 to 140° F)
Display: -25 to 60° C (-13 to 140° F)
Ambient Operating Humidity
5 to 90% noncondensing
